010203040506
Acid Pickling Tank
Pre-Heating Tank
Configuration: The configuration in the tank is in line with the process of heating and heat exchange, the material is designed with SUS304 steel pipe, and the heating valve, instrument, and condensate are automatically controlled.
Tank material: SUS 304.
It is necessary to calculate the load capacity of the tank and weld SUS304 reinforcing plate to prevent the tank from deforming.
Thermal insulation material: rock wool, used for pipes and steams that are over 80 ℃ covered with SUS304 / 0.3t steel plate) (steam and condensate).
Acid pickling tank.
Tank material: Designated made by PPH
The bottom of the tank is supported by a PPH grid board.
External skeleton: Welded steel structural parts (coated with epoxy paint), outside must be provided with anticorrosion protection PPH welded plates.
Pickling tank configuration: tank body (including steel skeleton), loop pump, graphite heat exchanger, acid screening program, vibration device, supporting valves, meters, etc.
Antifreeze/heat preservation design: acid liquid/alkali liquid/liquid/vapor/tank body/valve/.
Rinse Water Tank
Tank material: PPH material.
The bottom of the tank is supported by a PPH grid board.
External skeleton: Welded steel structural parts (coated with epoxy paint), outside must be provided with anticorrosion protection PPH welded plates
Pickling tank configuration: tank body (including steel skeleton), loop pump, graphite heat exchanger, acid screening program, vibration device, supporting valves, meters, etc.