010203040506
Customizable Drying Box from China Suppliers - Factory Direct Heating Solutions for Surface Treatment
Drying is generally used as the last process of surface treatment, depending on the customer's use requirements and whether the drying process is required. The drying box is made of a combination of carbon steel and steel sections welded together, the exterior is covered with an 80mm post insulation layer. It is equipped with a left and right automatic double door and burner heating system, and is equipped with anti-bumping blocks on both sides of the door track. Additional drying boxes can be individually customised according to customer process requirements.
Specifications & Configurations
Material & Structure
- Material: 5 mm thick 304 stainless steel.
- Structure: Steel frame support with thin steel sheets laid on the surface of the frame.
- Insulation layer.
- Bottom made of sloping surface.
- Main body materials all made of 304 stainless steel sheets.
- Steel structure overhead at the bottom of the drying box.
- High level drying chamber: entrance connected to the exit of the saponification tank tunnel, with a tunnel lift partition door in the middle.
- 3 Workstation design.
Configuration & Parameters
- Configuration: Box, drain valve and pipework.
- Steam heated pneumatic angle seat valve.
- Steam heated plate heat exchanger.
- Automatic operating upper cover.
- Circulation fans.
- Temperature sensor.
- Control: Automatic temperature control.
- Medium: Hot air.
- Function: Drying of the surface of the coils.
Operating Process
1
Manipulator runs to the first station in the drying box.
2
Rising of the tunnel lift partition door located between the saponification tank and the drying box and closing of the tunnel partition door.
3
Closing of the upper flap of the first station.
4
Resting of the discs in the chamber for a certain period of time. When the time has arrived, opening of the upper flap of the first and second station.
5
The robot drives the disc into the second station and closes the upper cover of the second station.
6
The tray is left in the box for a period of time. When the time has arrived, the upper cover of the second and third stations is opened.
7
The robot drives the disc strip into the third station and closes the upper cover of the third station.
8
The discs are left in the box for a period of time.
9
The time arrives, the drying box exit lift door is lowered and the drying box exit is opened.
10
Manipulator drives the tray to the next station, drying is completed.
11
When the robot reaches the next station, the drying box exit lift door rises and the drying box exit is closed.
Frequently Asked Questions (FAQ)
What is the primary function of the drying box?
The primary function of the drying box is the drying of the surface of the coils, which is typically used as the final process of surface treatment.
What materials are used to construct the drying box?
The main body materials are made of 5 mm thick 304 stainless steel sheets, supported by a steel frame. The exterior is covered with an 80mm post insulation layer, and the bottom features an overhead steel structure.
How is the temperature controlled, and what heating medium is used?
The system features automatic temperature control using hot air as the drying medium. It is equipped with a temperature sensor, steam heated pneumatic angle seat valve, and a steam heated plate heat exchanger.
How many workstations does the drying chamber have?
The drying chamber is designed with 3 workstations. The manipulator automatically moves the discs/trays step-by-step from the first station through the second and third stations.
Can the drying box configuration be customized?
Yes, additional drying boxes can be individually customized according to the specific process requirements of the customer.