Main Products
-
Acid mist tunnel + treatment tower
For the absorption of large quantities of acid mist generated during the reaction process in the pickling of wire, or for the design of customer designs for large quantities of acid mist generated by different materials in pickling applications.
The acid mist treatment tower is based on the number of acid slots and the internal volume of the full -seal tunnel. Generally, the components are composed of tower body, water tank, pump pump, glass fiber reinforcement fan, pH detection system, alkaline liquid automatic liquid addition system, chimney and acid mist pipeline. In conjunction with the full -seal tunnel to achieve the effects of negative pressure in the tunnel and the effect of acid mist treatment and recycling acid liquid. According to customer needs, customization can be customized.
-
Fully enclosed pickling tunnel
The top of the tunnel is equipped with vertical sealing strips. The sealing strip uses a 5MMPP soft board. The soft material has certain elasticity and has strong corrosion resistance. The tunnel structure is supported by steel cable connection and PP tendons. The top of the tunnel is equipped with anti -corruption lighting, and a transparent observation window is equipped on both sides. The operation of the acid mist tower fan causes negative pressure in the tunnel. The acid mist generated by the pickling is limited to the tunnel. The acid mist will not be able to get out of the tunnel, so that there is no acid mist in the production workshop, protecting the equipment and building structure. Nowadays, the tunnel sealing effect of most equipment manufacturers is not ideal. In response to this situation, the sealing tunnel can be transformed alone, but the acid mist treatment tower is needed at the same time.
-
Anticorrosive paint coating
The heavy-duty anti-corrosion process of vinyl 901 and vinyl 907 involves the pickling line foundation floor, walls, circulating pools, cleaning pools, ditches, equipment C-shaped hooks, steel structures, etc. to prevent the hazards and corrosion of acidic and alkaline media.
-
Customizable function tank
PP grooves, including pickles, washing grooves, rinse grooves, etc. The inner side uses a 25mm thick PP board, the outer steel is covered with steel, and the PP inner tank and steel structure are connected with a tank. Depending on the use temperature, the outer layer is covered with insulation cotton as a tank insulation. The groove is about 8 years in service life. The PP tank part can be customized or replaced according to the needs of the customer’s use needs.